Graph of No.180 crosses
|Standard||Thread: ISO 7/1|
|Dimension||ISO 49, DIN 2950,EN10242|
|Chemical property||(C %2.4-2.9), (Si %1.4-1.9), (Mn %0.4-0.65), (P% <0.1), (S%
|Physical property||Tensile strength>=350Mpa,Elongation>=10% Hardness<=150HB|
|Type||Beaded with ribs or banded with ribs|
|Beaded without ribs or banded without ribs|
|Surface||Galvanized/ no galvanized|
|Model||Elbow, Tees, Crosses, Bends, Unions, Bushings, Lateral Braches,
Sockets, Nipples, Hexagon/Round, Caps, Plugs, Locknuts, Flanges
,Side Outlet Tees, Side Outlet Elbows and etc|
|Application||Suitable for pipe connect of steam, air, gas, oil and so on|
|Buyer’s drawings or designs are available|
|Package||Cartons without pallet|
|Cartons with pallet|
|Double woven bags|
|Or as buyer’s requirements|
|Delivery details||According to the quantities and specifications of each order|
|Normal delivery time is from 30 to 45 days after receiving the
No.180 Crosses Malleable Iron Pipe Fitting Cross Forged Screw
Leyon is 30 years old , bend itself tosupply experience and
knowledge to provide No.180 crosses solutions for No.180
crossescustomers,in different places in No.180 crosses domain.
Leyon could offer speciality No.180 crosses help for outstanding
projects amid special construction surroundings just depend upon
the consociation with world top No.180 crosses makers on high-end
No.180 crosses products application.
Correlation table of No.180 crosses
Important informations of No.180 crosses
- The full automatic produce-lines we introduced from DISA Denmark,
DJ and SINTOKOGIO Japan have been a great improvement on No.180
The spectrometer of Oxford Instruments we bought for analyzing the
quality of No.180 crosses samples.
Higher heating value gas annealing furnace plays a decisive role on
improving material physical characteristics.
Each No.180 crosses after air tightness test, ensure no leakage.
Outlet size of No.180 crosses is from 1/8”to 4” .
Strong tenacity brings long service life of No.180 crosses.
No any pore discovered on surface.
avg. Thickness of zinc coating is higher than 86 um specified in
ASME, EN(70um), DIN(70um), SI(78um).