Attribute list of malleable iron pipe fittings socket
Online Shopping Galvanized Iron Extension Socket Welding Swage With
- Good toughness and long using life.
- Smooth surface without any sand hole.
- The layer of zinc exceeds the standard of ASME, EN, and BS, DIN and
so on .
- In order to ensure the quality of socket, we introduced the full
automatic produce-lines from DISA Denmark, DJ and SINTOKOGIO Japan.
- The spectrometer of Oxford Instruments has applied to test the
quality of socket .
We rely on higher heating value gas annealing furnace to import the
physical characteristics of galvanized iron extension socket.
Thread diameter, parallelism, angle, tooth type, every part on
thread will be regulated strictly .even each galvanized iron
extension socket must be sorted by plug gauge.
|Standard||Thread: ISO 7/1|
|Dimension||ISO 49, DIN 2950,EN10242|
|Chemical property||(C %2.4-2.9), (Si %1.4-1.9), (Mn %0.4-0.65), (P% <0.1), (S%
|Physical property||Tensile strength>=350Mpa,Elongation>=10% Hardness<=150HB|
|Type||Beaded with ribs or banded with ribs|
|Beaded without ribs or banded without ribs|
|Surface||Galvanized/ no galvanized|
|Model||Elbow, Tees, Crosses, Bends, Unions, Bushings, Lateral Braches,
Sockets, Nipples, Hexagon/Round, Caps, Plugs, Locknuts, Flanges
,Side Outlet Tees, Side Outlet Elbows and etc|
|Application||Suitable for pipe connect of steam, air, gas, oil and so on|
|Buyer’s drawings or designs are available|
|Package||Cartons without pallet|
|Cartons with pallet|
|Double woven bags|
|Or as buyer’s requirements|
|Delivery details||According to the quantities and specifications of each order|
|Normal delivery time is from 30 to 45 days after receiving the
A: How does it test ?
B: Gas leakage test for will be done.
A: What's the outlet dimension ?
Q: Outlet size is from 1/8”~6”.