Malleable iron pipe fittings swage nipple's size chart
Chinese Supplier Nipple DIN2982 Malleable Iron Pipe Fittings Swage
- Why the producer use the production line from DISA Denmark, DJ AMF
Japan, SINTOKOGIO Japan ? Because we want to make sure the quality
of the goods are ok .
- We apply the Spectrometer from Oxford Instruments to check the the
cast steel sample’s material quality.
- We use high heat value natural gas annealing furnace, strictly
control the annealing process, improve the physical properties of
- Each pipe fitting nipple after air tightness test, ensure no
- In order to control the calibre,parallelism, angle and tooth type
of the thread strictly,each pipe fitting plug needs to be checked
by plug gauge test.
- The outlet size for malleable iron pipe fittings swage nipple is
from 1/8” to 6”.
- Good toughness with long working life.
- The surface is smooth without any sand hole on malleable iron pipe
fittings swage nipple.
- Avg. thickness of zinc coating is higher than 86 um specified in
ASME, EN(70um), DIN(70um), SI(78um) is basic demand for the
Malleable iron pipe fittings swage nipple's Parametric form
|Standard||Thread: ISO 7/1|
|Dimension||ISO 49, DIN 2950,EN10242|
|Chemical property||(C %2.4-2.9), (Si %1.4-1.9), (Mn %0.4-0.65), (P% <0.1), (S%
|Physical property||Tensile strength>=350Mpa,Elongation>=10% Hardness<=150HB|
|Type||Beaded with ribs or banded with ribs|
|Beaded without ribs or banded without ribs|
|Surface||Galvanized/ no galvanized|
|Model||Elbow, Tees, Crosses, Bends, Unions, Bushings, Lateral Braches,
Sockets, Nipples, Hexagon/Round, Caps, Plugs, Locknuts, Flanges
,Side Outlet Tees, Side Outlet Elbows and etc|
|Application||Suitable for pipe connect of steam, air, gas, oil and so on|
|Buyer’s drawings or designs are available|
|Package||Cartons without pallet|
|Cartons with pallet|
|Double woven bags|
Or as buyer’s requirements
|According to the quantities and specifications of each order|
|Normal delivery time is from 30 to 45 days after receiving the