Measurement chart :
1"Flat Seat Cwd Bs Standard Conical En 10242 Galvanized Pipe
- To insure high quality ,union,we applied the imported DISA from
Denmark,automatic product lines from DJ AMF and SINTOKOGIO Japan
- We use the spectral analysis of Oxford instruments to test the
quality of the material.
We use the gas annealing furnace of high heating value,which is to
control the annealing procedure strictly and improving the physical
Eachunion has been ensured by air-tight test against leakage.
To guarantee precision, size is under our control.
The inch of union’s outlet is from 1/8 "~4".
No strong tenacity, no long service life.
Glossy surface with no pore.
The layer of zinc exceeds the standard of ASME, EN, and BS, DIN and
|Standard||Thread: ISO 7/1|
|Dimension||ISO 49, DIN 2950,EN10242|
|Chemical property||(C %2.4-2.9), (Si %1.4-1.9), (Mn %0.4-0.65), (P% <0.1), (S%
|Physical property||Tensile strength>=350Mpa,Elongation>=10% Hardness<=150HB|
|Type||Beaded with ribs or banded with ribs|
|Beaded without ribs or banded without ribs|
|Surface||Galvanized/ no galvanized|
|Model||Elbow, Tees, Crosses, Bends, Unions, Bushings, Lateral Braches,
Sockets, Nipples, Hexagon/Round, Caps, Plugs, Locknuts, Flanges
,Side Outlet Tees, Side Outlet Elbows and etc|
|Application||Suitable for pipe connect of steam, air, gas, oil and so on|
|Buyer’s drawings or designs are available|
|Package||Cartons without pallet|
|Cartons with pallet|
|Double woven bags|
|Or as buyer’s requirements|
|Delivery details||According to the quantities and specifications of each order|
|Normal delivery time is from 30 to 45 days after receiving the