Chart of din standard conical joint union
Data of din standard conical joint union
|Standard||Thread: ISO 7/1|
|Dimension||ISO 49, DIN 2950,EN10242|
|Chemical property||(C %2.4-2.9), (Si %1.4-1.9), (Mn %0.4-0.65), (P% <0.1), (S%
|Physical property||Tensile strength>=350Mpa,Elongation>=10% Hardness<=150HB|
|Type||Beaded with ribs or banded with ribs|
|Beaded without ribs or banded without ribs|
|Surface||Galvanized/ no galvanized|
|Model||Elbow, Tees, Crosses, Bends, Unions, Bushings, Lateral Braches,
Sockets, Nipples, Hexagon/Round, Caps, Plugs, Locknuts, Flanges
,Side Outlet Tees, Side Outlet Elbows and etc|
|Application||Suitable for pipe connect of steam, air, gas, oil and so on|
|Buyer’s drawings or designs are available|
|Package||Cartons without pallet|
|Cartons with pallet|
|Double woven bags|
|Or as buyer’s requirements|
|Delivery details||According to the quantities and specifications of each order|
|Normal delivery time is from 30 to 45 days after receiving the
1" size conical joint union din standard conical joint union gi
pipe fittings union
- The layer of zinc exceeds the standard of ASME, EN, and BS, DIN and
Good toughness ensure long using life of din standard conical joint union.
Outlet size is from 1/8”to 4” .
There are two groups of malleable cast iron namely whiteheart malleable cast iron and
blackheart malleable cast iron. These two groups are differentiated by
chemical composition, temperature and time cycles of the annealing
process, the annealing atmosphere and the properties and
microstructure resulting there from.
Whiteheart malleable cast iron – It is a decarburized cast iron.
The microstructure of whiteheart malleable cast iron depends on section size.
Blackheart malleable cast iron – It is either ferritic or
pearlitic. Ferritic blackheart malleable cast iron is softer and