Dim. Table :
Main element of Factory HEX bushing
The equipments from DISA Denmark, DJ AMF Japan, SINTOKOGIO Japan
widely used in our Factory HEX bushing product line, ensures the
stability of product quality.
Spectrometer from oxford instruments is adopted to examine the
quality of the material of Factory HEX bushing.
The annealing process and physical performance have been strictly
controlled by the gas annealing furnace of high heat value.
After air-tightness test,each bushing will be in the condition of
Command the calibre of the thread,parallelism,angle,tooth type
grimly,and every pipe fitting union need examination.
From 4x3’’ through 8X6”,the outlet size of pipe fitting is
Long use life depends on the great toughness.
Sand hole doesn’t exist in the smooth surface.
Beyond the standard zinc coating thickness of ASME,EN,DIN and
SI,our products can be trustworthy.
Basic information :
|Standard||Thread: ISO 7/1|
|Dimension||ISO 49, DIN 2950,EN10242|
|Chemical property||(C %2.4-2.9), (Si %1.4-1.9), (Mn %0.4-0.65), (P% <0.1), (S%
|Physical property||Tensile strength>=350Mpa,Elongation>=10% Hardness<=150HB|
|Type||Beaded with ribs or banded with ribs|
|Beaded without ribs or banded without ribs|
|Surface||Galvanized/ no galvanized|
|Model||Elbow, Tees, Crosses, Bends, Unions, Bushings, Lateral Braches,
Sockets, Nipples, Hexagon/Round, Caps, Plugs, Locknuts, Flanges
,Side Outlet Tees, Side Outlet Elbows and etc|
|Application||Suitable for pipe connect of steam, air, gas, oil and so on|
|Buyer’s drawings or designs are available|
|Package||Cartons without pallet|
|Cartons with pallet|
|Double woven bags|
|Or as buyer’s requirements|
|Delivery details||According to the quantities and specifications of each order|
|Normal delivery time is from 30 to 45 days after receiving the