Detail information of maleable iron pipe fitting Hex Plug High
|Standard||Thread: ISO 7/1|
|Dimension||ISO 49, DIN 2950,EN10242|
|Chemical property||(C %2.4-2.9), (Si %1.4-1.9), (Mn %0.4-0.65), (P% <0.1), (S%
|Physical property||Tensile strength>=350Mpa,Elongation>=10% Hardness<=150HB|
|Type||Beaded with ribs or banded with ribs|
|Beaded without ribs or banded without ribs|
|Surface||Galvanized/ no galvanized|
|Model||Elbow, Tees, Crosses, Bends, Unions, Bushings, Lateral Braches,
Sockets, Nipples, Hexagon/Round, Caps, Plugs, Locknuts, Flanges
,Side Outlet Tees, Side Outlet Elbows and etc|
|Application||Suitable for pipe connect of steam, air, gas, oil and so on|
|Buyer’s drawings or designs are available|
|Package||Cartons without pallet|
|Cartons with pallet|
|Double woven bags|
|Or as buyer’s requirements|
|Delivery details||According to the quantities and specifications of each order|
|Normal delivery time is from 30 to 45 days after receiving the
Significate detail of maleable iron pipe fitting Hex Plug High pressure
- After tightness test,each socket can be ensured no leakage.
- We definitely have taken calibers of thread, parallelism, Angle,
tooth type under control,and each union will be examined by plug gauge.
- Avg. thickness of zinc coating is higher than 86 um specified in ASME, EN(70um),
- Smooth surface without any sand hole,no leakage.
- To make sure the long time using life ,it is necessary to keep good toughness .
- Compete size range of maleable iron pipe fitting Hex Plug High pressure : from 1/8”-6”.
- Higher heating value gas annealing furnace was assembled in
product-line to improve material physical characteristics.
- Factory uses Oxford Instruments to analysis the quality of maleable iron pipe fitting Hex Plug High pressure samples.
- We imported full automatic produce-lines from DISA Denmark ,DJ and SINTOKOGIO Japan on malleable iron elbow making and quality ensuring .
Size data of maleable iron pipe fitting Hex Plug High pressure