Excel of Hot dipped electric Galvanized plug
Top 9 points of Hot dipped electric Galvanized plug
Through airtight test, the quality of every socket can be ensured .
Thread diameter, parallelism, angle, tooth type will be controlled
strictly and tested each union with plug gauge.
Avg. thickness of zinc coating is higher than 86 um specified in ASME, EN(70um),
Smooth surface ,no sand hole on the surface of Hot dipped electric Galvanized plug.
Better toughness and long service life.
Outlet size of Hot dipped electric Galvanized plug is from 1/8”to 6” .
Using high calorific value of natural gas annealing furnace,manipulate the annealing process rigorously,improve the physical properties of the materials.
The cast iron samples are used to test its material’s quality by
using spectrometer from Oxford Instruments.
Malleable cast iron pipe elbow processing production using Danish
imports of Di sand, Japan's long East and the new East automatic
production lines to ensure product quality.
Attached list of Hot dipped electric Galvanized plug
|Standard||Thread: ISO 7/1|
|Dimension||ISO 49, DIN 2950,EN10242|
|Chemical property||(C %2.4-2.9), (Si %1.4-1.9), (Mn %0.4-0.65), (P% <0.1), (S%
|Physical property||Tensile strength>=350Mpa,Elongation>=10% Hardness<=150HB|
|Type||Beaded with ribs or banded with ribs|
|Beaded without ribs or banded without ribs|
|Surface||Galvanized/ no galvanized|
|Model||Elbow, Tees, Crosses, Bends, Unions, Bushings, Lateral Braches,
Sockets, Nipples, Hexagon/Round, Caps, Plugs, Locknuts, Flanges
,Side Outlet Tees, Side Outlet Elbows and etc|
|Application||Suitable for pipe connect of steam, air, gas, oil and so on|
|Buyer’s drawings or designs are available|
|Package||Cartons without pallet|
|Cartons with pallet|
|Double woven bags|
|Or as buyer’s requirements|
|Delivery details||According to the quantities and specifications of each order|
|Normal delivery time is from 30 to 45 days after receiving the