Dim. chart of weld Fig No. 301 plug galvanized plug
Hot High Quality Weld Fig No.301 Galvanized plug with FM/UL Certificate
In order to guarantee product quality, our equipments are imported from Japan and Denmark, like DISA, DJ AMF, SINTOKOGIO.
Cast iron samples were analyzed by spectral analysis of Oxford
Instruments to examine the quality of the material.
we use spectrometer from Oxford Instruments to check the material's
Outlet size of weld Fig No. 301 galvanized plug is from 1/8”to 6” .
Making sure of long-time working, we have strick requirements of
toughness during process.
The surface of weld Fig No. 301 galvanized plug is smooth without trachoma.
The zinc average coating thickness is higher than the requirements
of standard for ASME(86 um), EN(70um), DIN(70um) and SI(78um).
Control Thread diameter, parallelism, angle, tooth type strictly.
Each Union should be tested with plug gauge.
Make sure there is no leakage; every weld Fig No. 301 galvanized
plug must succeed in air tightness test.
Data tabulation of weld Fig No. 301 galvanized plug
|Standard||Thread: ISO 7/1|
|Dimension||ISO 49, DIN 2950,EN10242|
|Chemical property||(C %2.4-2.9), (Si %1.4-1.9), (Mn %0.4-0.65), (P% <0.1), (S%
|Physical property||Tensile strength>=350Mpa,Elongation>=10% Hardness<=150HB|
|Type||Beaded with ribs or banded with ribs|
|Beaded without ribs or banded without ribs|
|Surface||Galvanized/ no galvanized|
|Model||Elbow, Tees, Crosses, Bends, Unions, Bushings, Lateral Braches,
Sockets, Nipples, Hexagon/Round, Caps, Plugs, Locknuts, Flanges
,Side Outlet Tees, Side Outlet Elbows and etc|
|Application||Suitable for pipe connect of steam, air, gas, oil and so on|
|Buyer’s drawings or designs are available|
|Package||Cartons without pallet|
|Cartons with pallet|
|Double woven bags|
|Or as buyer’s requirements|
|Delivery details||According to the quantities and specifications of each order|
|Normal delivery time is from 30 to 45 days after receiving the